Although many people entrust the installation of wallpaper to professionals and those who have expertise in this field, because wallpaper has a high installation speed and does not need to dry like paint, people themselves They can also do this by following some simple techniques that we mention in this article; to do First, to install the wall paper, you need the necessary equipment and tools such as a work table, a ladder, a large brush, a plastic spatula, a plastic roller, a plumb line, a ruler, a meter, and scissors, which must be provided and placed in a corner near the workplace. For times of need. Before installing wallpaper, you should remove all the signs and devices on the wall, and in case of installing wallpaper on the ceiling, you should disconnect the electricity meter and disconnect the lamps, etc. Before installing wallpaper, the wall must be underlaid, but the meaning of underlayment is that we must eliminate moisture and various moistures on the wall, because if the wall has moisture, it will have problems after installation, so before installation, damp parts must be cleaned. scrape with a metal spatula until the moisture source is gone. After doing these basic tasks, we will install the rolling paper in several steps:
The first step: Before we install the paper on the wall, and in the first step, we should measure the wall and write down the measurements, and it is better to leave 5 cm from the top and bottom for the interior. Consider. Second step: After measuring the length, width and height of the desired wall, you should cut and measure the wallpaper. Let's go on the table, for this we will place the roll of wall paper on the wall and based on its size we will also cut the other tiles and with the help of a ruler we will make the cuts more correctly. At this stage, if the wallpaper is patterned and not simple, we should cut the second panel so that the designs are next to each other, and after cutting one roll and before moving on to the next roll, it is better to install it.
Third step: In this step, we prepare the wallpaper glue according to the included instructions, and for this we stir the glue inside a clean surface so that it dissolves completely in water. .
Fourth step: In this step, we apply the prepared glue to the back of the wallpaper using a paint brush, which we do from the center of the wallpaper towards the edges. We do not glue the edges too much. We apply the glue in such a way that it is enough and does not drip, and we take time for a period of 5 to 15 minutes. It is better not to increase this interval in order to avoid problems such as stretching and... After these works, we install the wall paper from the top to the bottom and guide the wall paper glue from the center to the outside with a plastic spatula. After gluing a tile, we cut the extra edges of the wall paper with the help of a razor and a ruler. After installing the wallpaper, bubbles may appear, which will disappear over time and after 4-5 days.